Microwave Oven Multi-Functional Grill for Steaks and Vegetables

Most microwave oven accessories on the market are only for steaming or heating, and cannot achieve grilling. This is because ordinary plastic or silicone containers lack heat retention and heating capabilities.
We have developed a different product. The core of the Microwave Oven Multi-Functional Grill for Steaks and Vegetables is a microwave energy-absorbing base. This base is made of a magnetic stainless steel material with a specific composition, which can quickly convert electromagnetic energy into heat energy in a microwave field. The measured surface temperature can reach 200-230℃ (depending on the microwave oven's power and heating time). The silicone edges only serve to fix the food in place and prevent burns; they do not participate in the heating process.
This grill pan is designed specifically for users in Europe, America, and Japan, and is perfect for offices, apartments, dormitories, and RVs. Unlike bulky microwave grill pans that rely on electricity, it is more convenient and practical.
Although Ningbo Sai'an was founded in 2024, our core team has over 15 years of experience in silicone products. This mature product is now in mass production with a stable supply, providing an ideal grilling solution for various scenarios.

Quick Product Overview

Core features and advantages

1. Measured bottom temperature above 200℃: The baking pan is equipped with a heat-conducting, wave-absorbing material. In a 1000W microwave oven, heating for 2 minutes without load, the surface temperature of the bottom pan reaches 210℃ (measured with an infrared thermometer). This temperature is sufficient to induce a Maillard reaction on the surface of the steak.
2. Heating time 3-5 minutes: A 200g frozen steak will be well-done in approximately 4 minutes on high power. The exact time needs to be adjusted according to the microwave's power.
3. Food-grade wear-resistant non-stick coating with raised grid pattern: This design allows for better drainage of excess oil during cooking, resulting in lower-fat, lower-oil cooking; it also elevates the food, increasing the surface area exposed to heat and evenly locking in juices and creating grill marks; steaks, chicken wings, fish, and shrimp will not stick and can be easily rinsed with water.
4. Anti-scalding edges: The outer red ring is made of high-temperature-resistant food-grade silicone, which insulates against the high temperature of the baking pan, preventing burns when handling.
5.White lid with pressure relief and ventilation: The top of the white lid has ventilation holes to release excess moisture during braising, preventing water accumulation and softening of the food; it also seals in the juices, locking in the juices of grilled steak and the aroma of baked rice, while preventing oil splattering, keeping the microwave cavity clean and free of oil stains.

Technical parameters

Material Selection

Based on customer pricing requirements and target market regulations, we offer the following material options:

All material options must pass LFGB or FDA testing before shipment. We recommend customers prioritize the standard option, as test data is complete.

application field

Based on existing customer orders, this product is primarily used in the following scenarios:
1. Office lunch breaks: Users can take marinated meats and vegetables from the refrigerator and heat them in the microwave for 3-5 minutes. No need to queue for public ovens.
2. Single apartments/dormitories: For preparing simple meals in environments without gas stoves or range hoods.
3. RVs/camping: A lightweight alternative to open-flame grills when the campsite kitchen is equipped with a microwave.
4.Gift channels: As appliance promotional gifts, insurance reward gifts, or corporate holiday gift boxes. We already have case studies of customizing logos for Volkswagen Japan and Snoopy Japan.

Why choose us

Company Establishment: Ningbo Sai'an Intelligent Technology Co., Ltd., registered in 2024. The team was formerly an independent silicone products factory.
Production Experience: Core production personnel have over 15 years of experience in silicone molding. The company has R&D, quality control, and foreign trade departments.
Factory Area: Located in Cixi Andong Industrial Zone; specific area data can be provided upon factory audit requirements.
Certifications: The factory has passed ISO9001:2015 quality management system certification and BSCI social responsibility audit.
Product Certifications: LFGB (German food contact testing), FDA (USA), CE (EU safety).
Patents: Design patents in China, the United States, and the United Kingdom (certificates verifiable).
Export Markets: Europe and America 30%, Japan 25%, Taiwan 15%, Hong Kong 15%, South Korea 10%, Australia 2%, New Zealand 2%, Mexico 1%.
Testing Capabilities: Internally capable of performing LFGB migration testing (external laboratory verification), hardness testing, temperature aging testing, and microwave energy distribution testing.

Quality control

Quality control is performed according to the following steps:
1. Incoming Quality Control (IQC): Silicone raw materials are checked against the batch COA (Certificate of Acceptance) and hardness is tested. The thickness and coating adhesion of the chassis steel are tested.
2. First Article Inspection (FA): The first 10 products produced after the mold is installed are fully inspected by the quality inspector for dimensions and appearance, and tested for temperature rise in a microwave oven. Mass production can only begin after passing these tests.
3. In-Process Quality Control (IPQC): Every 2 hours, 5 products are randomly selected from the production line for peel strength testing (at the silicone-to-chassis bonding area) and temperature resistance testing (placed in a 230℃ oven for 30 minutes).
4. Finished Product Inspection (OQC): Before packaging, samples are taken according to AQL standards (fatal defects 0, major defects 1.0, minor defects 2.5). Inspection items include surface scratches, burrs, and the adhesion of the printed logo.
Simulated transportation test: Before each batch is shipped, one box is randomly selected for drop test (free fall from 80cm to a cement ground) and vibration test (frequency 5Hz, 30 minutes).

Certificate

FAQ

Q1: Will this baking tray spark when placed in the microwave?
A: No. The tray material is specially designed to prevent arcing in standard household microwave ovens. However, please ensure the tray does not contact the microwave oven's interior walls or metal rack.

Q2: Can it be used in a microwave oven with a grilling function?
A: Only use the "Microwave" mode, not the "Grill Combo" mode. Heating the quartz or halogen tube in the latter will cause the silicone to exceed its temperature resistance range.

Q3: Does the product have LFGB and FDA certifications?
A: Yes. The LFGB report includes a total olive oil migration test, and the FDA report is based on 21 CFR 177.2600. PDF files are available.

Q4: What is the minimum order quantity?
A: 1000 pieces for standard colors. 3000 pieces for custom logos or custom colors. 2-3 samples are available; a sample fee will be charged and refunded after the bulk order is placed.

Q5: What is the delivery time?
A: After sample confirmation and deposit payment, the production cycle is 15-20 days. During peak season (August-October), delivery time may be extended to 25 days.

Q6: Can you provide a version without a non-stick coating?
A: Yes. Some customers choose an uncoated stainless steel base, but this will reduce release performance. It is recommended to apply cooking oil before each use.

Q7: What is the product warranty period?
A: 1 year. Warranty coverage: Silicone cracking, base separation from silicone. Excluded from warranty: Coating scratches, melting due to microwave oven misoperation.

Packaging and Shipping

1. Customer Sample Confirmation: Samples are signed and retained.
2. Deposit Payment: 30%-50%
3. Production Scheduling: The PMC department schedules production, typically 15-20 days.
4. Mid-term Inspection: When production is 50% complete, the customer or a third-party organization (SGS/BV) can inspect the goods at the factory. Video inspection is also available.
5. Final Payment: Payment is made after inspection is passed.
6. Booking and Shipment: We assist in contacting freight forwarders to ship from Ningbo Port or Shanghai Port. We provide packing list, invoice, copy of bill of lading, and certificate of origin (if required).
Document Delivery: We provide an electronic multilingual user manual.

Collaboration Cases

1. Volkswagen Japan: Licensed by the brand to customize versions featuring the Volkswagen logo as gifts for car owners.
2. Snoopy Japan: Custom versions with embossed Snoopy designs, sold in the Japanese market.
3. ANDY MAY2 (Taiwan): ODM collaboration, sold through the brand's channels in Taiwan.

Quick Product Overview